MyEnergi EDDI+ 3-Phase Energy Diverter, 16A, 9kW, WiFi-Enabled - EDDI-16A3P02H
credit
myenergi eddi+ 9kW 3-Phase 230/400V IP20 Solar Diverter (EDDI-16A3P02H)
The myenergi eddi+ EDDI-16A3P02H is a 3-phase eco-smart energy diverter designed to route surplus renewable generation into resistive heating loads, delivering 9kW output from a 3 x 230/400V AC supply with a 16A rated current and IP20 enclosure rating for indoor wall installation. It linearly controls resistive load sizes from 150W minimum to 9kW maximum, supports 2 x PT1000 temperature sensor inputs, and includes wall bracket mounting with bottom cable entry plus two 16A/250V AC multifunction relays, with compliance listed to RED, EMC and LVD directives and the stated EN standards. For sustainability targets, eddi+ helps reduce grid import by using surplus solar or wind energy for hot water and heating, supporting lower overall consumption and improved environmental compliance through higher renewable self-use.
Reach out to Green2Go's sales team via phone by calling 01424 231585 or via our 'Contact Us' page for bespoke renewable energy solutions. Benefit from expert advice and competitive pricing. Make your sustainable switch today.
KEY FEATURES
- 3-Phase Microgeneration Energy Diverter for solar PV and wind systems
- Maximize self-consumption by diverting surplus power to heating appliances
- Rated Supply Voltage: 3x 230/400V (3-Ph)
- Rated Current: 16A
- Resistive Load Size: 150W min. / 9kW max.
- Wireless Interface: 868 / 915MHz for remote monitoring
- Grid Current Sensor: 100A max., 16mm max. cable diameter
- Supply Frequency: 50Hz
- Built-in WiFi and Ethernet for seamless connectivity
- Temperature Sensor Inputs: 2x PT1000
- IP20 Protection Rating – indoor installation required
- Power Control Technology: VariSine™ pure sine wave (PWM)
- Operating Temperature Range: -20°C to +40°C
- Colour / Finish Steel
Additional Information
- Dimensions (H x W x D) 330mm x 271mm x 64mm